Plate Carrier Front Pouch

Low-profile 2-liter front-mounted utility pouch for plate carriers, providing quick-access storage for gloves, electronics, hearing protection, or personal medical supplies.

The Zentauron Plate Carrier Front Pouch adds approximately 2 liters of easily accessible storage to compatible plate carriers and protective vests without using additional MOLLE space.

A hook-and-loop mounting panel on the rear is positioned between the carrier flap and cummerbund, allowing the pouch to hang directly beneath the front of the plate carrier.

The compartment can be opened almost completely using a dual-zipper system, making equipment easy to identify and access while the pouch remains mounted.

Made in Germany.

2-Liter Quick-Access Storage

The pouch provides approximately:

2 L / 122 cu in

of additional storage.

Typical contents can include:

• Gloves
• Smartphone
• Hearing protection
• Batteries
• Small electronics
• Personal equipment
• Compact tools
• Other quick-access accessories

The pouch is especially useful for equipment that should remain accessible without opening a backpack or rear-mounted pouch.

Suitable for Personal First-Aid Equipment

The compartment can also be configured for personal medical supplies such as:

• Bandages
• Adhesive dressings
• Trauma shears
• Tourniquet
• Gloves
• Other compact first-aid equipment

The pouch itself is a general-purpose storage platform, not a preconfigured IFAK or medical kit.

Medical supplies are not included.

Full-Opening Dual-Zipper Design

Two zipper sliders allow the pouch to open from either direction.

The zipper extends toward the rear of the pouch, allowing the front panel to open very widely for improved access to the contents.

This makes it easier to:

• See the complete loadout
• Reach equipment at the bottom
• Organize medical or utility equipment
• Access the pouch while it remains mounted

Rubber Zipper Pulls

Both zipper sliders are equipped with rubberized pull tabs.

These provide improved grip and make the pouch easier to operate while wearing gloves.

Hook-and-Loop Plate Carrier Mounting

A hook-and-loop mounting panel is integrated into the rear of the pouch.

The panel is secured between the carrier's front flap and cummerbund interface.

This mounting concept provides several advantages:

• No MOLLE weaving required
• Does not consume front MOLLE space
• Easy to install or remove
• Keeps storage centered beneath the front plate
• Compatible with appropriate hook-and-loop carrier interfaces

Front Identification Panel

A loop field measuring approximately:

3.9 × 2.0 in / 10 × 5 cm

is sewn onto the front.

It can be used for:

• MED patches
• Equipment labels
• ID patches
• Unit markings
• Personal patches

This is particularly useful if the pouch is configured for a specific purpose such as medical equipment.

Zentauron Compatibility

The pouch is compatible with Zentauron plate carriers and protective vests that use the appropriate hook-and-loop mounting interface.

Compatible products should be identified in the accessory listings of the specific carrier.

Third-Party Carrier Compatibility

According to Zentauron, the pouch can also be used with selected third-party carriers including:

• Warrior Assault Systems DCS
• Bundeswehr-issued LHT / Lindnerhof plate carrier
• Other compatible carriers with suitable hook-and-loop geometry

Exact fit depends on the carrier's flap, cummerbund, and hook-and-loop interface.

Lightweight Cordura® Construction

The pouch is manufactured from Cordura® Polyamide 6.6 and weighs only approximately:

2.6 oz / 75 g

This provides useful additional storage with very little added carrier weight.

Key Features

• Approx. 2 L / 122 cu in capacity
• Front-mounted plate carrier utility pouch
• Hook-and-loop mounting panel
• Mounts between carrier flap and cummerbund
• Does not require MOLLE attachment space
• Dual-zipper opening
• Opens almost completely for easy access
• Rubber zipper pulls
• Suitable for general utility equipment
• Can organize personal medical supplies
• Front 3.9 × 2.0 in / 10 × 5 cm patch panel
• Compatible with selected Zentauron carriers
• Compatible with selected third-party plate carriers
• Cordura® Polyamide 6.6 construction
• Lightweight at approx. 2.6 oz / 75 g
• Made in Germany

Technical Specifications

Material: Cordura® Polyamide 6.6
Dimensions: approx. 8.7 × 5.9 × 2.0 in / 22 × 15 × 5 cm
Volume: approx. 2 L / 122 cu in
Weight: approx. 2.6 oz / 75 g
Closure: Dual Zipper
Zipper Pulls: Rubber Pulls
Mounting: Hook-and-Loop
Patch Area: approx. 3.9 × 2.0 in / 10 × 5 cm
Country of Origin: Germany

Included

• 1 × Zentauron Plate Carrier Front Pouch

Plate carrier, medical supplies, electronics, hearing protection, and other equipment are not included.

Compatibility Note

The pouch requires a compatible hook-and-loop interface between the carrier flap and cummerbund.

Compatibility with third-party plate carriers depends on the size and placement of those surfaces and should be verified for the specific carrier model.

Mission Frontline Take

This type of pouch is valuable because it adds storage in an area of the carrier that would otherwise often go unused.

Instead of sacrificing MOLLE columns for another utility pouch, the rear hook-and-loop panel places the compartment directly below the front plate bag.

The full-opening zipper is also a real advantage. A small pouch becomes much more useful when you can actually see everything inside instead of digging through a narrow top opening.

At only 75 grams, the pouch adds very little empty weight and can work equally well for general utility equipment or a compact personal medical setup.

For users who want a simple German-made front pouch that adds accessible storage without taking up MOLLE space, this is a very practical plate carrier upgrade.